Rustic Extremely Chunky Industrial Shelving Unit

Our Rustic Industrial Extremely Chunky Shelving Units are constructed from premium SFC C24 structural boards. The units are either one, two, three or four boards high. The units can either be fixed to a wall or free stand on the floor. If free standing its advised that the unit is still secured to the wall to prevent the unit tipping or being pulled over. All our furniture is hand made in our Swansea workshop so if you require a specific size or height table, not available in the selection, please contact us and we will help with your request.

The metal units are welded and fabricated in our Swansea workshop from chunky 40x40mm box section. We only use quality steel, much thicker than foreign imports. The steel is wire brushed and then coated with a durable clear lacquer to help prevent rusting.
Unlike foreign imports all our furniture is completely handmade in South Wales, UK using locally sourced materials. We strongly believe in supporting local and use local suppliers wherever possible.

Our Extremely Chunky boards are sealed with commercial grade furniture oil. Do not use strong multi-surface spray cleaners on the tabletop as this may damage the finish. Wipe up any spills immediately and clean with warm water. Its advisable to oil the boards every few months to maintain the protection.

Each board is unique this does mean that the colour and overall finish will vary from board to board and may differ from that shown in the photos. The extra chunky boards can have cracks/splits/shakes, dents and dings,. All these characteristics are what set solid wood boards apart from laminated table tops. Our extra chunky boards may have a small amount of twist, cupping or bowing and may move a little whilst they acclimatise to their new environment.

When staining new C24 boards, it’s important to be aware that every board may stain slightly lighter or darker and the colour may vary depending on your screen contrast and brightness. However, we have done our best to display our stains in the photographs.

Our Extremely Chunky Shelving Units are delivered as two, three or four single boards with the metal unit ends separate, making it easier to access buildings and reduce delivery cost. It is recommended that a professional or experienced person assembles and fixes the unit to the wall.
The boards will require screwing to the metal ends, this will be made easier with an electric drill/screwdriver but is still possible by hand. The Extremely Chunky shelving unit is supplied with the screws required and is best assembled on the wall or on the ground if free standing. The metal ends are screwed to the wall with fixings best suited to the wall type, be it solid like brick or plasterboard. The Shelving unit is supplied with x4 100mm screws and red plugs suitable for a masonry wall. If you require any other type of fixing this will have to be supplied by the installer.
The metal ends are recommended to be placed 50mm in from both ends. The hole fixings for the wall are places such that the shelf hides them once assembled, if additional holes need to be drilled this is possible with a metal drill bit. Any questions with fitting please contact us for help and advice. Like all our furniture, delivery is FREE!

Our guarantee covers all our furniture and accessories for the expected 10yr lifetime of the product. See our Terms and Conditions for more information. T and C's